10g x 25mm Countersunk Self Tapping Screw Phillips Zinc Plated
Free Shipping
Free Shipping
Estimated Delivery Time
For an estimated delivery time, please visit the product page of the item you wish to purchase. Enter your postcode into the "When will I receive this item?" section to receive a tailored delivery estimation. Please note that these estimates can vary based on stock availability, shipping conditions, and other variables.
Free Shipping
Every order will automatically receive free standard shipping, ensuring you get your items without any additional cost.
Free Express Shipping
Orders over $50 qualify for free express shipping, with an estimated delivery timeframe of 1-4 business days.
Next Business Day Delivery
Next business day delivery is available for selected postcodes and is subject to AusPost terms and conditions. Please refer to the table below for eligible postcodes:
| City/State | Eligible Postcodes |
| Canberra | 0200-0250, 2600-2620, 2900-2914 |
| Sydney | 1000-1920, 2000-2249, 2555-2574, 2740-2786 |
| Melbourne | 3000-3207, 3340-3341, 3750, 3755-3757, 8000-8785 |
| Brisbane | 4000-4209, 9016-9019 |
| Gold Coast | 2484-2490, 4210-4275, 9726 |
| Adelaide | 5000-5171, 5800-5950 |
| Perth CBD | 6000-6005, 6800-6899 |
| Tasmania | 7000-7019, 7050-7053, 7055, 7248-7251, 7253, 7258, 7261, 7267, 7275-7300, 7306, 7310, 7311-7315, 7320-7322, 7325, 7800-7899 |
Same-day Dispatch
DMS Fasteners aims to dispatch all weekday orders placed before 2:00 PM (AEST) on the same day.
Order Tracking
Once your order has been dispatched from our warehouse, you will receive an email notification containing your shipment tracking information. This allows you to monitor your package's journey and get a clear estimate of its arrival.
International Shipping Policy
Please be aware that international shipments may be subject to import duties, taxes, and customs processing fees, which are levied once the package reaches its destination country. These charges are the responsibility of the recipient and are not included in our shipping fees.
Important Notes
While we strive to provide accurate delivery estimates, please be aware that delays can occur due to factors such as stock availability, shipping conditions, and other unforeseen variables. We appreciate your understanding and patience in such situations.
Additionally, please note that tracking information may or may not be provided depending on the item purchased. If tracking is available, you will receive an email notification with your shipment tracking details once your order has been dispatched.
No Deadline Returns
No Deadline Returns
Unlimited Returns with Full Store Credit
While we offer an unlimited timeframe to return your items, please note that all returns will be refunded as store credit equivalent to the full order value. This helps us maintain our high standards of quality and service. Please note that cancellations will also be treated as returns and will be refunded as store credit.
Return Conditions
To be eligible for a return, your item must be in the same condition you received it-unused, uninstalled, and in its original packaging. You’ll also need the receipt or proof of purchase.
Start Your Return
- Self-Serve Returns (For Registered Customers): If you have a customer account, you can initiate a return directly through our self-serve returns portal. This streamlined process is quick and easy.
- Via Email: If you don’t have a customer account, no problem! Just email us at info@dmsfasteners.com.au to start your return process.
Please note, the buyer is responsible for the return shipping label and associated costs.
Return Process
Once your return request is accepted, we will provide you with instructions on how and where to send your package. Please remember, items sent back to us without first requesting a return will not be accepted.
Damages and Issues (30 days)
Upon receiving your order, please inspect it and contact us within 30 days if the item is defective, damaged, or if you receive the wrong item. We will evaluate the issue and work promptly to resolve it.
Exchanges
To exchange an item, return the original item, and once the return is accepted, you can make a separate purchase for the new item.
Refunds
After we receive and inspect your return, we will inform you whether the refund was approved or not. Approved refunds will be processed, and a credit will automatically be applied to your original method of payment within 5 business days. Note that it may take some time for your bank or credit card company to process and post the refund.
If more than 15 business days have passed since we approved your return, please contact us at info@dmsfasteners.com.au.
Initiate A Return
To initiate a return, please sign into your account and open a return ticket:
Initiate a Return
| Screw Type | : | Chipboard Screw |
| Gauge | : | 10G |
| Drive Type | : | Phillips Drive |
| Drive Size | : | PH2 |
| Head Type | : | Countersunk Head |
| Head Height | : | Approx. 2.5 mm |
| Head Diameter | : | Approx. 8.5 mm |
| Thread Diameter | : | 4.8 mm |
| Thread Pitch | : | 16 TPI |
| Thread Length | : | Contact us for exact specifications |
| Point Type | : | Sharp Point |
| Corrosion Resistance | : | Salt Spray Resistance between 48 to 96 hours. The chromate conversion coating offers additional protection against corrosion. Suitable for mild humidity exposure and occasional wet conditions such as light outdoor equipment. |
| Material Application | : | Useful for a wide variety of materials including soft woods - plastics - thin metals. More suitable for rigid materials which need a sharper entry point and materials where pre-drilling is impractical. |
| Installation Recommendations | : | Ensure the correct drive type and size is used as mentioned above. Can be benefitial to drill a small pilot hole to ensure clean insertion. Avoid over-tightening. Apply steady pressure when driving the screw. |
| Product Type | : | Multipurpose Screws |
| Disclaimer | : | This information is provided for general informational purposes only. While efforts have been made to ensure accuracy and reliability, it is offered without warranty. Consultation with professionals or experts is advisable for specific situations. The authors, publishers, and distributors bear no responsibility for errors, omissions, or actions based on this information. Users assume all associated risks, and reliance on any part of the content is at the user's own risk. |
Countersunk Self-Tapping Phillips Drive Screws for Wood
Enhance Your Woodworking Projects with Countersunk Self-Tapping Phillips Drive Screws
Discover the precision and durability of our Countersunk Self-Tapping Phillips Drive Screws, engineered for excellence in wood construction and woodworking projects. These screws are designed to secure a tight and durable hold in various wood materials, including chipboard, MDF, and hardwoods, without the need for pre-drilling. Ideal for applications requiring a flush finish, such as cabinetry, furniture assembly, and decorative woodworking, our Countersunk Phillips Drive Screws deliver reliability and a clean aesthetic.
Product Features:
- Phillips Drive: Offers superior torque control and reduces the risk of cam-out with its cross-shaped design, ensuring efficient installation with a Phillips screwdriver.
- Countersunk Head: Designed to sit flush with the surface, the countersunk head provides a smooth, seamless appearance, enhancing the project's aesthetic appeal while reducing snagging risks.
- Self-Tapping Design: These screws cut their own thread as they are driven into the wood, saving time on installation, reducing labor costs, and minimizing material damage. This feature ensures a tighter fit and a more durable hold.
- Versatile Application: Perfect for a broad range of woodworking projects that require a sleek finish, including cabinetry, furniture assembly, and general construction with wood composites.
Specifications:
- Screw Gauges Available: 4g, 5g, 6g, 8g, 10g, 12g, and 14g to accommodate various material thicknesses and project demands.
- Lengths Available: 6mm, 10mm, 12mm, 16mm, 20mm, 25mm, 32mm, 38mm, 45mm, and 50mm ensuring the perfect fit for your specific application.
Finish Styles:
- G304 Stainless Steel: Known for its corrosion resistance, G304 stainless steel is ideal for projects requiring durability and resistance to environmental elements.
- Zinc Plated: Offers additional corrosion resistance with a bright and clean finish, ideal for projects where aesthetics are important.
Use Cases:
- Cabinetry and Furniture Assembly: Achieve a secure hold and a flawless finish for cabinets, drawers, and furniture.
- General Wood Construction: Perfect for constructing frames, subfloors, and roofing where a strong hold and a flush finish are required.
- Decorative Woodworking: Enhance the beauty of your woodworking projects with a screw that combines functionality with a clean, polished look.
Our Countersunk Self-Tapping Phillips Drive Screws are a testament to quality and efficiency, designed to elevate your woodworking projects with durability and a refined finish.
Request for Quote (RFQ) – Response Within the Hour
Trade Account
Looking for a new supplier for fasteners? Open a trade account with us today.
Technical Resources
Access our technical guides and resources for detailed information on your fasteners.
Over 20,000 Happy Customers Across All Channels
Really good to deal with, one of the best, I will buy again and again, fast shipping times.
There guys were great! Fast to dispatch and followed up with a phone call. Great after sales service and my order was quite small so huge thumbs up from me!
Well priced item. Prompt postage. Great service.
Very happy with my purchase. The screws I bought were good quality and came relatively quickly. DMS have a good range and quantity options to choose from so I will be buying from them again.
Very good value and they arrived in very quick time. It's a lot cheaper and easier than shopping at Bunnings.
